NP Hire

We have compiled equipment specific to our work, the building and maintenance of greenhouses and other buildings where ground conditions are poor, this requires specialist plant.

We are now offering this equipment for hire.


We have built this machine specifically for our work on large greenhouse builds where we need to get parts across the site without leaving ruts which would normally be left with a telehandler, the remote-controlled crane is then able to move the parts as required.

 

The machine is built on a 2-ton Canyacom tracked dumper with an 8-ton trailer crane, which has a lifting capacity of 1 ton with a 6m reach and a built-in winch.

 

The dumper seat swivels 180 degrees so that it makes the machine easy to drive forward or reverse.

 

The trailer has post holes to secure loads and is extendable for longer loads.

 

Specifications

Height 3100mm

Length 8300mm

Width 2400mm

Weight 5000kg

Lifting Capacity 1200kg @ 1.2m

Reach 6m


Our large Omega scissor lift 612TS is self-levelling with a large working area, the 90-degree swivel platform will work in conditions where conventional wheeled scissor lifts get stuck.

The 90-degree Swivel feature on this machine is ideal for building or maintaining greenhouses and enables you to traverse down the length of the structure with the deck at 90 degrees.

The huge deck extensions allow you to work full width, making them ideal for building structures or installing screens, irrigation and other ancillary equipment. 

 

Specifications

Maximum working height 10.2m

Maximum platform height 8.2m

Stowed height (top guardrails) 3.2m

Stowed height (guardrails lowered) 2.85m

Stowed height (guardrails removed) 2.28m

Length 4.16m

Width 2.2m

Lifting capacity 1250kg

Ground clearance 350mm

Platform length retracted 4m

Platform length extended 7.1m

Platform width 2.1m

Gradeability 35%

Platform levelling 5deg

Platform rotation 90deg

Weight 8200kg


Our large Omega scissor lift 505TS  is self-levelling with a large working area, the 90-degree swivel platform will work in conditions where conventional wheeled scissor lifts get stuck.

 

The 90-degree Swivel feature on this machine is ideal for building or maintaining greenhouses and enables you to traverse down the length of the structure with the deck at 90 degrees. 

The huge deck extensions allow you to work full width, making them ideal for building structures or installing screens, irrigation and other ancillary equipment. 

 

Specifications

Maximum working height 9.6m

Maximum platform height 8.5m

Stowed height (top guardrails) 2.82m

Stowed height (guardrails lowered) 2.47m

Stowed height (guardrails removed) 1.66m

Length 3.5m

Width 1.8m

Lifting capacity 500kg

Ground clearance 330mm

Platform length retracted 3.5m

Platform length extended 6m

Platform width 1.7m

Gradeability 40%

Platform levelling (front, back) 6deg

Platform levelling (sideways) 10deg

Platform rotation 90deg

Weight 5200kg


These compact and agile tracked crawler boom lifts are one-person operated with the capability to work and track on slopes of up to 5 degrees.

 

Unlike other small, tracked booms which limit tracking to ground level these machines will track at reduced speed with a 5.5m working height, which means a more efficient working experience.

 

These machines are generally used for smaller tasks which only need one person in the air, such as wiring and fitting out the structures once the main structure has been built.

Specifications:

Maximum working height 8.8m

Maximum platform height 6.8m

Stowed height 1.99m

Length 4.08m

Width 1.65m

Lifting capacity 150kg

Ground clearance 330mm

Platform length 3.5m

Platform width .77m

Platform length .62m

Gradeability 30%

Working tilt 5deg

Weight 2620kg


This compact bulldozer is capable of pre-build site levelling, due to its compact size it can work inside greenhouses or buildings for final floor finish levelling.

When forming growing beds this machine will level quickly and accurately with slope and camber adjustment to achieve the correct drainage on the beds. The machine is fitted with laser-level sensing equipment which controls the hydraulics on the machine to a high-level of tolerance.

The low ground pressure rubber track enables the machine to work on soft ground and reduces the potential of any damage when manoeuvring on finished surfaces and concrete.

 

Specifications:

Height 2.45m

Length 3.365m

Width 2.56m

Weight 4241kg

Net engine power 40hp (30KW)

Max speed 3.5mph

Gears fwd 2

Gears Rev 2

Contact us now to learn more. Give us a call on 01282 873120 or Email Us to discuss your requirements with us further.